Siemens Hicom 300 Commands

1.	Create a New Extension:
1.1.	ADD-SCSU:1520,,ANATE,0,0,98,98,4,4,1,1,0,,0,YES,0,1,,,,,,DTMF,,,,,,,,,,,,"",,,,FLOAT,,,NO,,,,0,0;
1.1.1.	If Step 1.1 gives error : THIS CALL NUMBER IS NOT CONFIGURED IN THE DIAL PLAN (DPLN).
1.1.2.	ADD-WABE:1520,,,STN,N;
1.1.3.	If Step 1.1 gives error : THIS STATION IS ALREADY CONFIGURED
1.1.4.	Press Ctl+X to abort the command; go to Step 1.2
1.2.	CHA-PERSI:NAME,1520,,Arick Lis;
1.3.	ADD-ZIEL:TYPE=FWD,SRCNO=1520,SI=VCE,DESTNOF=2301;
1.4.	ADD-ACTDA:STN,1520,FWD,,2301;
2.	Forward an extention to a physical extension:
2.1.	ADD-ZIEL:TYPE=FWD,SRCNO=2520,SI=VCE,DESTNOF=5209;
2.2.	ADD-ACTDA:STN,2520,FWD,,5209;
2.3.	CHA-PERSI:NAME,5209,,Arick Lis;
3.	To create PIN for a new volunteer:
3.1.	ADD-PERSI:STN,6224,,,64047;
4.	To delete PIN
4.1.	DEL-PERSI:PIN,64047;
5.	Enable/Disable  STD, local etc
5.1.	CHA-SCSU:6210,,,,,1; 1: ISD 2: STD 3: Local 4 Internal
6.	Call tracing(incoming)
6.1.	CHA-SCSU:8208,,,99;
7.	Cancel Call tracing
7.1.	CHA-SCSU:8208,,,17;
8.	Copy call records
8.1.	ADD-GEZAB:S,1,0;
8.2.	exec-updat:bp,delta;