Intellinet Wireless 300N PoE Access Point Firmware download

Intellinet Wireless 300N PoE Access Point

300 Mbps, MIMO, PoE Support, Bridge, Repeater, Multiple SSIDs and VLANs

Model Number:  

Download the firmware here

Features:

Up to 300 Mbps network link speed

Complies with 2.4 GHz IEEE 802.11n standard and is backward compatible with IEEE 802.11g/b standards

2T2R MIMO technology for enhanced throughput and coverage

Supports WMM function to meet the multimedia data bandwidth requirement

Supports Wi-Fi Protected Setup (WPS)

Supports WEP and WPA/WPA2 (TKIP and AES) data encryption

IEEE 802.3af-compliant PoE-powered device with one PoE (PD) port

Integrated RADIUS authentication server for 16 wireless clients

DHCP server assigns IP addresses for all LAN users

Supported modes: Access Point, Bridge Point-to-Point, Bridge Point-to-Multi-Point, WDS and Universal Repeater

Supports multiple ESSIDs with individual security settings

Multiple ESSIDs support VLAN tagging

Easy installation through Web-based user interface

Firmware upgradeable

Use INTELLINET NETWORK SOLUTIONS Wireless N adapters for the best compatibility and performance

Three-Year Warranty

Specifications: 

Standards

IEEE 802.1d (Spanning Tree Protocol)

IEEE 802.11b (11 Mbps Wireless LAN)

IEEE 802.11g (54 Mbps Wireless LAN)

IEEE 802.11n (300 Mbps Wireless LAN)

IEEE 802.1x (Network Access Control)

IEEE 802.3 (10Base-T Ethernet)

IEEE 802.3af (Power over Ethernet)

IEEE 802.3u (100Base-TX Fast Ethernet)

General

LAN port: 1 RJ45 10/100 Mbps data and power input port (PD port)

LAN ports with Auto MDI/MDI-X

Flash: 4 MB

Memory: 16 MB SDRAM

Certifications: FCC Class B, CE Mark, RoHS

Wireless

Chipset: Ralink RT3052

Wireless frequency range: 2.400 – 2.483 GHz

Modulation technologies:
- 802.11b: Direct Sequence Spread Spectrum (DSSS): DBPSK, DQPSK, CCK
- 802.11g: Orthogonal Frequency Division Multiplexing (OFDM): BPSK, QPSK, 16QAM, 64QAM
- 802.11n: Orthogonal Frequency Division Multiplexing (OFDM): BPSK, QPSK, 16QAM, 64QAM

Data rates:
- IEEE 802.11b (11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps)
- IEEE 802.11g (54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, 6 Mbps)
- IEEE 802.11n (MCS0-15: up to 300 Mbps)

Output power:
- OFDM: 14 dBm +/- 1.5 dBm (300 Mbps, 40 mW max.)
- OFDM: 15 dBm +/- 1.5 dBm (54 Mbps, 40 mW max.)
- CCK: 17 dBm +/- 1 dBm (11 Mbps, 63 mW max.)

Receiver sensitivity:
- 11n (300 Mbps) MCS0-15: 20 MHz: -73 dBm; 40MHz: -68 dBm
- 11g (54 Mbps) OFDM: -78 dBm
- 11b (11 Mbps) CCK: -91 dBm

Wireless operation modes:
- Access Point
- Station Infrastructure (AP Client)
- Point-to-Point Bridge
- Point-to-Multi-Point Bridge
- WDS Bridge
- Universal Repeater

Wireless security:
- WEP encryption (64/128 bit)
- WPA TKIP
- WPA2 AES
- WPA2 mixed
- WPA RADIUS
- 802.1x Authentication
- Internal MD5/PEAP RADIUS server
- Client access control through media access control (MAC) filter

Antennas:
- 2 detachable dipole antennas with 3 dBi gain each
- 2T2R MIMO mode (2 transmitters, 2 receivers)

LEDs

Power

WLAN Link/Act

LAN Link/Act

Environmental

Dimensions: 160 (W) x 127 (L) x 35 (H) mm (6.3 x 5.0 x 1.4 in.)

Weight: 0.8 kg (1.7 lbs.)

Operating temperature: 0 – 40°C (32 – 104°F)

Operating humidity: 10 – 90% RH, non-condensing

Storage temperature: -20 – 60°C (4 – 149°F)

Power

External power adapter: 5 V DC, 1.0 A

Power consumption: 4 Watts max.

Via PoE PD port: 48 V, 0.2 A

Package Contents

Wireless 300N PoE Access Point

User Manual

2 detachable antennas

Power adapter

Ethernet Cat5 RJ45 cable: 1.0 m (3 ft.)