We are developing a custom firmware based on openwrt for this router. Please comment below if you would like to get updates about this.
Device Hardware Specs:
Device Hardware Specs:
D-Link DIR-816 A1
Part number: OIR816IEU-A1E
Availability: India
Manuf/OEM/ODM SGE AP699E8C .CW125A
Series: AC750
CPU1: MediaTek MT7620A (580 MHz)
Update: RAM1: 512Mb winbond w9751g6kb-25 8M * 4 Banks* 16Bit DDR2 SDRAM
FLA1: ? MiB (Brand? Model?)
FLA1: ? MiB (Brand? Model?)
Expansion IFs: none specified
WI1 chip1: MediaTek MT7620A
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
WI2 chip1: MediaTek MT7610EN
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 1x1:1
WI2 antenna connector: none
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
WI2 chip1: MediaTek MT7610EN
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 1x1:1
WI2 antenna connector: none
ETH chip1: MediaTek MT7620A
Switch: MediaTek MT7620A
LAN speed: 10/100
LAN ports: 4
WAN speed: 10/100
WAN ports: 1
Switch: MediaTek MT7620A
LAN speed: 10/100
LAN ports: 4
WAN speed: 10/100
WAN ports: 1
Hardware images:
CPU & GPU
CPU Type:
MIPS24KEc
CPU Bit:
32-bit
CPU Core:
Single (1)
CPU Frequency:
580/600MHz
Connectivity
IEEE 802.11:
n
Wi-Fi Freqency:
2.4GHz
Antenna:
2T2R
External FEM:
Yes
Ethernet:
5 port Fast Ethernet Switch + RGMII(2)
PCI-Express:
Host/Device
USB:
USB 2.0 Host/Device
Slow I/O:
GPIO,
I2C,
JTAG,
UART(2)
Internal Hardware Features
Network Accelerator:
2Gbps IP4 routing,
NAT,
NAPT
DRAM:
16b SDR,
16b DDR1,
16b DDR2
Flash:
SPI,
SLC NAND
Storage Accelerator:
Yes
Audio Interface:
I2S,
PCM
Software
iNIC:
Linux 2.4/2.6 (RGMII, PCI-Express)
OS:
eCos,
Linux 2.6.36 SDK,
OpenWrt
I'm interested in knowing about the custom firmware for Dlink DIR-816 A1.
ReplyDelete